Setting Command; Cf_Lang Command; Cf_Menuposition Command; Cf_Inputsearch Command - Sanyo PLC-XW250 - 2600 Lumens Manual

PLC-XW200/250 Expand Serial Command Functional Specifications

8.10 Setting Command

8.10.1 CF_LANG Command

Command "CF_LANG_%1"[CR]
"ENG" --------------------------- Select English
"DEU" --------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ----------------------------- Select Italian
"ESP" ---------------------------- Select Spanish
"POR" --------------------------- Select Portuguese
"NED" --------------------------- Select Dutch
"SVE" --------------------------- Select Swedish
"RUS" --------------------------- Select Russian
"CHI" ---------------------------- Select Chinese
%1
"KOR" --------------------------- Select Korean
"JPN" --------------------------- Select Japanese
"FIN" ---------------------------- Select
"POL" --------------------------- Select Polish
"HUN" -------------------------- Select
"ROM" -------------------------- Select
"THA" -------------------------- Select Thai
"TUR" -------------------------- Select Turkish
"KAZ" -------------------------- Select Kazakh
Set language for OSD
The language set by this command is stored in EEPROM and its setting is
Details
effective after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.2

CF_MENUPOSITION Command

Command "CF_MENUPOSITION_%1"[CR]
%1 "SET" ------------------ Move the menu display to next position
Change the menu position
This command is available in normal Power ON status.
The language set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
Position: top left - top right – center – bottom left-bottom right – top left-...
Acceptable
Response
Unacceptable

8.10.3 CF_INPUTSEARCH Command

Command "CF_INPUTSEARCH_%1"[CR]
"OFF" ------------------------- Set Input search operation to OFF
%1 "ON1" ------------------------- Set Input search operation to On1
"ON2" ------------------------- Set Input search operation to On2
Set Input search operation mode.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
Details This command is available in normal Power ON status.
Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once.
e.g. If projector receives Input search OFF command while Auto PC ADJ. and
Keystone are OFF, it returns error code "101"..
Acceptable
Response
Unacceptable
Finnish
Hungarian
Romanian
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
30 / 64