Remote Systems Information - HP StorageWorks P9000 User Manual

Use the DKC Operation window to:
"Configure storage systems for Continuous Access Journal Z, define logical paths " (page 58)
"Configure additional logical paths " (page 60)
View one of the following:
◦ "Remote Systems Information " (page 177)
"Logical Path Information" (page 178)
◦
◦ "Port Information for the local system" (page 179)
NOTE: DKC is an acronym for disk controller, which controls an entire storage system. Cnt Ac-J
Z windows use the term "DKC" to indicate a storage system.
LDKC is an acronym for logical disk controller, and it also may be called logical DKC. LDKC is a
controller that controls a logical storage system that exists in P9500. In the Cnt Ac-J Z window, the
term "LDKC" indicates a logical storage system.
Item
Display
Tree
Operation
Preview
Operation

Remote Systems Information

The list area on the DKC Operation window shows information about the remote system when you
select DKC in the Display box and the LDKC in the tree.
Description
Changes information in the DKC Operation window.
DKC shows information about the remote storage systems and the logical paths.
Port shows information about ports on the local storage system.
Shows either of the following, depending on the selection in Display.
Remote storage systems.
Channel adapters on the local storage system and port attributes.
Shows information about one of the following, depending on what is selected in Display and
Tree:
Remote storage systems. See
Logical paths. See "Logical Path Information" (page
Ports on the local storage system. See
Shows changes made in the window before they are applied to the system. You can modify
or delete by right-clicking on an item. When the information is correct, click Apply.
Indicates the operation in progress in the DKC Operation window.
"Remote Systems Information " (page
178).
"Port Information for the local system" (page
177).
179).
DKC Operation window 177