Configuring Wireless Lan Setting And Security Setting - Sanyo PLC-XU355A - 3500 Owner's Manual

Configuring wireless LAN setting and security setting

Configure the wireless LAN setting and security setting for Wireless 4 and Wireless 5.
Configuring wireless LAN setting
1. Click page [2] of setting pages. Following wireless LAN setting can be done. After completing the
configuration, press Set button.
Item
Wireless Mode ........Select the Communication standard 802.11b or 802.11b/g
Network Type. ......... Select either "Infrastructure" or "AdHoc". When selecting the "AdHoc", the security
SSID/ESSID ...............Set the SSID/ESSID. (up to ASCII 32 characters)
Channel .....................I f you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11.
Description
"WPA-PSK" and "WPA2-PSK" mode are not available.
SSID/ESSID is case-sensitive. Even though all characters on the Wireless
information is uppercase, it is necessary to distinguish between upper case and
lower case characters.
Configuring wireless LAN setting and security setting