Configuring Wireless Lan Setting And Security Setting - Sanyo PLCXL51 Owner's Manual

Sanyo projector owner's manual
Hide thumbs Also See for PLCXL51:
Table of Contents

Advertisement

Configuring wireless LAN setting and security setting

Configure the wireless LAN setting and security setting for LAN4 and LAN5.
Configuring wireless LAN setting
1. Click page [2] of setting pages. Following wireless LAN setting can be done. After completing the
configuration, press Set button.
Item
Wireless Mode ........Select the Communication standard 802.11b or 802.11b/g
Network Type. ......... Select either "Infrastructure" or "AdHoc". When selecting the "AdHoc", the security
SSID/ESSID ...............Set the SSID/ESSID. (up to ASCII 32 characters)
Channel .....................I f you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11.
Description
"WPA-PSK" and "WPA2-PSK" mode are not available.
SSID/ESSID is case-sensitive. Even though all characters on the Wireless
information is uppercase, it is necessary to distinguish between upper case and
lower case characters.
Configuring wireless LAN setting and security setting
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-xl51 - 2700 lumens

Table of Contents