Using The Network Communication - Sanyo PLC-XU355A - 3500 Owner's Manual

Chapter 8 Network capture functions
Example of advanced use
Displays the presentation data stored in the computer by using the wireless mouse function
from the projector.
1
Start capturing of the computer PC1 by using the projector.
Select "Network Capture" icon from the menu and select "PC1" and then select "Connect" (+ p.92).
=> The Network Capture software installed in the selected computer will start capturing.
2
On the image of the PC1 projected on the screen, search a presentation file data stored in the PC1 by
using the wireless mouse function of the remote control supplied with the projector.
3
Select a desired file and double click with the remote control .
=> The application by which the document was created starts and the projector projects the presentation picture
on the screen.
4
Start the presentation.
=> By using wireless mouse function, control the page browsing and some other operations for the PC1.
✐ For further instructions of the wireless mouse, please refer to the projector's owners manual.
✐ On the projected screen using with the network capture, the shape of the mouse pointer differs from the one on
the computer's screen.
* PC provides the Network Capture.
PC1
PC3

Using the Network Communication

This Network Communication is to communicate by sharing the captured image of a computer with
multiple computers and a projector. Users can draw the text and figure on the captured image by using
a drawing tool.
The data that has the captured image of a Main PC and communication information is sent to the
projector. The projector projects this data onto the screen and serves this data to other computers (Sub
PC) at the same time. The Sub PC receives served captured data and displays it on the screen. The Main
PC and Sub PC also can edit the captured image by using the drawing tool. This edited image is applied
to all the computers automatically.

PC2
Capture
PC4
PC5
PJ2
Project a screen
image of PC1
with PJ2.
* Controls PC1 with wireless mouse.
Setting condition
Projector
Input mode: Network
Registering the connection:
The IP address of the
computer and proper
parameter must be set to
the PC1 (+ p.89-90).
Mouse Display: "On"
(+ p.91)
Computer PC1
Software:
The Network Capture 5 is
activated.