Sanyo PLC-XU355A - 3500 Owner's Manual page 139

■ Speed of playing back images are very slow.
When connecting on AdHoc mode, check which Wireless channel you are using.
If the computer using the same channel as yours is existing closely, the networking speed may be
reduced or the communication unstable. Change the channel to resolve the problem. The channels
of the projector and projector Client computer must be the same. Or adjust the Quality selection in
the parameter setting.
Refer to "Parameter set up" (+p.88).
■ Projector does not reproduce the computer's sound during the real time capturing.
To reproduce the sound in the projector correctly, follow the procedures below;
• Start up the real time capture and then start up the movie player software.
• Terminate the movie player software first and then terminate the real time capture.
Check that the "PJ Virtual Audio Device" is selected on the audio device panel of the computer.
Double click Sound and Audio Device icon on the Control Panel of the computer. The property
window appears. Click Audio tab on the property window and check that "PJ Virtual Audio Device" is
selected on the Default device of Sound playback item.
Troubleshooting
1