Control By The Computer With Usb Memory - Sanyo PLC-XU355A - 3500 Owner's Manual

[4] Control by the computer with USB memory

The real time capture function can run automatically on the computer without the Network Viewer
& Capture 5 software installed by executing the Auto Capture program in the USB thumb drive
connected to the computer. The USB thumb drive for Auto Capture is supplied with this projector.
CD-ROM > AutoCapture
1. Copy all of the folders and files in the "AutoCapture" folder on the Network Viewer & Capture 5 CD-
ROM to the root of a commercial-release USB thumb drive by drag and drop.
2. Turn on the projector and select "Wireless" from the input menu of the projector.
3. Select "Wireless Setting" from the "Network" menu of the projector and press SELECT button. Select
"SIMPLE" with the Point 7 8 buttons.
4. By connecting the above USB thumb drive, the removable disk window appears. Select "[Network
Capture 5] Open Program using the program provided on the device." and then click OK.
5. Automatically, the activated executable file configures the Easy wireless setting. (If the network
adaptor selecting window appears, select an option according to your network environment.) Then,
it searches the projector, and starts the real time capture of the computer screen.
6. If the auto-run program does not start automatically, double-click "WinAutoCap5" in the USB thumb
drive. (The auto-run program works only with Windows XP and Windows Vista.)
7. For the following operations, refer to Page 90.
Setting condition for automatically starting the real time capture function
Projector:
Computer PC1:
✐ If the error message appears, check item "Parameter set up" (+ p.88).
✐ When you start capturing with "Select capturing object" on the parameter set up window checked, the Select
capturing object window (+ p.89) appears.
✐ When your computer provides multiple network adaptors, and "Select normal network adaptor" on the parameter
setup window is un-checked, the network adaptor selecting window (+ p.24) will appear.
PJ1
(+ p.39)
Power: On, Input mode: Wireless, Wireless setting: SIMPLE
The searching result becomes only one projector.
Log in by Administrative
The wireless LAN card: Provided, Network Capture 5 software: NIL
Activate WinAutoCap5 in USB thumb drive
PC1
Project this screen
PC2
image with PJ2.
USB memory provides
Auto Capture program.
USB thumb drive
Using the real time capture
* Start capturing of
the PC1.