Configuring Wireless Lan Setting And Security Setting - Sanyo 1AV4U19B25500 Network Manual

Configuring wireless LAN setting and security setting

Configure the wireless LAN setting and security setting for Wireless 4 and Wireless 5.
Configuring wireless LAN setting
1. Click page [2] of setting pages. Following wireless LAN setting can be done. After completing the
configuration, press Set button.
Item
Wireless Mode ........Select the Communication standard 802.11b or 802.11b/g/n.
Network Type. ......... Select either "Infrastructure" or "AdHoc". When selecting the "AdHoc", the security
SSID/ESSID ...............Set the SSID/ESSID. (up to ASCII 32 characters)
Channel .....................I f you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11.
Notes for entering characters:
The "¥" symbol is displayed as "\" when the ASCII key is used. The "]" symbol is treated as a character
by the ASCII key, but it is not interpreted as a character by the HEX key. In HEX, the "]" symbol is
displayed in red and setting is denied.
You can not set all the characters with the "]" symbol. It will be considered as no operation.
ASCII key characters : Space - 0 to 9 A to Z a to z ! " # $ % & ' ( ) * + , . / : ; < = > ? @ [ ¥ ] ^ _ ` { | } ~
HEX key characters : 0 to 9 a to f
Description
"WPA-PSK" and "WPA2-PSK" mode are not available.
SSID/ESSID is case-sensitive. Even though all characters on the Wireless
information is uppercase, it is necessary to distinguish between upper case and
lower case characters.
Configuring wireless LAN setting and security setting