Cf_Ccaptioncolor Command; Cf_Rcode Command; Cf_Keydis Command - Sanyo PLC-XU355A - 3500 Manual

PLC-XU305/355 Expand Serial Command Functional Specifications

8.10.18 CF_CCAPTIONCOLOR Command

Command "CF_CCAPTIONCOLOR_%1"[CR]
"COLOR" ------- Select Color
%1
"WHITE" -------- Select White
Select color of Closed caption.
The status set with this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
Details This command is available in normal Power ON status.
Closed caption is available under conditions below;
Entered signal is appropriate (Video, NTSC signal of S-video, Component=480i)
and System is fixed to NTSC or 480i.
Acceptable
Response
Unacceptable

8.10.19 CF_RCODE Command

Command "CF_RCODE_%1"[CR]
"001" --------------------------- Select Code1
"002" --------------------------- Select Code2
"003" --------------------------- Select Code3
"004" --------------------------- Select Code4
"005" --------------------------- Select Code5
"006" --------------------------- Select Code6
%1
"007" --------------------------- Select Code7
"008" --------------------------- Select Code8
"UP" --------------- Switch Code setting of Remote Control forward
"DN" --------------- Switch Code setting of Remote Control backward
Select Code of Remote Control
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.10.20 CF_KEYDIS Command

Command "CF_KEYDIS_%1"[CR]
"NONE" ----------------------- RC & Projector keys are valid (All are valid)
%1 "RC" ---------------------------- RC keys are invalid
"KEY" -------------------------- Projector keys are invalid
Diable RC/Projector keys
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
(Code1 → Code2 → Code3 ...→ Code8 → Code1)
(Code8 → Code7 → Code6... → Code1 → Code8)
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
38/68