Cf_Freeze Command; Cf_Vmute Command; Cf_Ptimer Command - Sanyo PLC-XU355A - 3500 Manual

PLC-XU305/355 Expand Serial Command Functional Specifications

8.11.4 CF_FREEZE Command

Command "CF_FREEZE_%1"[CR]
"ON" ------------------------ Set Freeze to ON
"OFF" ----------------------- Set Freeze to OFF
"UP" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
%1
"DN" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
Note) "UP" and "DN" behave the same.
Set/Cancel Freeze setting.
Although projector returns "000", receiving another Freeze command does not
Details
release Freeze operation.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.11.5 CF_VMUTE Command

Command "CF_VMUTE_%1"[CR]
"ON" --------------------------- Set No show ON
"OFF" ------------------------- Set No show OFF
"UP" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
%1
"DN" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
Note) "UP" and "DN" behave the same.
Set/Cancel No show setting.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.11.6 CF_PTIMER Command

Command "CF_PTIMER_%1"[CR]
%1 "SET" ---------------Excute P-TIMER
Display / Suspend / Cancel P-TIMER
Details This command behaves the same as "P-TIMER" key of Remote Control /
Projector.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
42/68