Setting Command; Cf_Lang Command; Cf_Menuposition Command; Cf_Autosetuppcadj Command - Sanyo PLC-XU355A - 3500 Manual

PLC-XU305/355 Expand Serial Command Functional Specifications

8.10 Setting Command

8.10.1 CF_LANG Command

Command "CF_LANG_%1"[CR]
"ENG" --------------------------- Select English
"DEU" --------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ----------------------------- Select Italian
"ESP" ---------------------------- Select Spanish
"POR" --------------------------- Select Portuguese
"NED" --------------------------- Select Dutch
"SVE" --------------------------- Select Swedish
"RUS" --------------------------- Select Russian
%1
"CHI" ---------------------------- Select Chinese
"KOR" --------------------------- Select Korean
"JPN" --------------------------- Select Japanese
"FIN" ---------------------------- Select
"POL" --------------------------- Select Polish
"HUN" -------------------------- Select
"ROM" -------------------------- Select
"THA" -------------------------- Select Thai
Set language for OSD
The language set by this command is stored in EEPROM and its setting is
Details
effective after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.2

CF_MENUPOSITION Command

Command "CF_MENUPOSITION_%1"[CR]
%1 "SET" ------------------ Move the menu display to next position
Change the menu position
This command is available in normal Power ON status.
The language set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
Position: top left - top right – center – bottom left-bottom right top left-...
Acceptable
Response
Unacceptable

8.10.3 CF_AUTOSETUPPCADJ Command

Command "CF_AUTOSETUPPCADJ_%1"[CR]
"ON" ------------------- Set Auto PC ADJ. function to ON
%1
"OFF" ------------------ Set Auto PC ADJ. function to OFF
Set/Cancel Auto PC adj. function
This command is available in normal Power ON status.
Details Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once.
e.g. If projector receives Auto PC ADJ. OFF command while Keystone and Input
search are OFF, it returns error code "101".
Acceptable
Response
Unacceptable
Finnish
Hungarian
Romanian
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
33/68