HP P2000 Release Note page 8

Installing firmware using the Storage Management Utility (SMU) — MSA2000 G2 and
P2000 G3 environments
1. Place the downloaded firmware package in a temporary directory.
2. If using a Smart Component, extract the contents of the Smart Component.
In Windows — Click Extract on the first screen of the Smart Component.
In Linux — Enter ./CPxxxxxx.scexe --unpack=<folder name> to extract the contents of
the Smart Component to the <folder name> folder. (For example,./CP123456.scexe
unpack=extract_here)
3. Locate the firmware file in the extracted folder. The firmware filename is in the following format:
O3xxBxx-01.bin
4. In single-domain environments, stop all I/O to the vdisks before starting the firmware update.
5. Login to the SMU and, in the Configuration View panel, right-click the system and select Tools >
Update Firmware.
A table displays currently installed firmware versions.
6. Select the enclosure modules to update.
NOTE:
7. Click Browse and select the firmware file to install.
8. Click Install Expansion-Module Firmware File.
Wait for progress messages to specify that the update is complete.
9. In the SMU display, verify that the proper firmware version appears for each module.
8 Installation instructions
All enclosures in an array configuration must use the same firmware version.