HP NetStorage 6000 User Manual page 122

Integrating with Management Applications
HP OpenView Network Node Manager Integration
UNIX (HP-UX and Sun Solaris) Installation
Note
Note
10-5
You need to be at the HP-UX or Solaris machine where HP OpenView is
installed.
To install HP OpenView NNM for UNIX:
Make sure that Network Node Manager (NNM) Services has been
1
started.
Shut down the NNM graphical user interface program.
2
Insert the HP NetStorage 6000 CD into your CD-ROM drive.
3
4 Run the following script /ovw/HPUX_Sol/install.sh by typing
cd /cdrom
cd /ovw/HPUX_Sol
/install.sh
Start the NNM graphical user interface program. The HP NetStorage
5
6000 symbol and menu will not appear until NNM discovers it at the
next polling time.
To mount the HP-UX CD-ROM:
The CD can be read correctly only with a pfs_mount CD-ROM command.
At the console, start the following background processes (& =
1
background process):
> pfs_mountd&
> pfsd&
Verify such background processes exist with:
2
> ps -ef | grep pfs
At the console, enter:
3
> pfs_mount /cdrom
or
> pfs_mount <device-file> /cdrom
(an example of <device-file> is /dev/dsk/c1t2d0
; i.e., > pfs_mount /dev/dsk/c1t2d0 /cdrom)
Verify the CD-ROM is mounted by entering
4
> bdf
When finished, unmount the CD-ROM with the command:
5
> pfs_umount /cdrom