3–Configuring CHAP
Normal Session—Bi-directional CHAP
Normal Session—Bi-directional CHAP
Follow this procedure to configure a bi-directional (BiDi) CHAP used during a
normal session.
To configure BiDi CHAP in a normal session:
1.
On the router, follow these steps.
a.
b.
c.
2.
To add the initiator that is about to do a normal login, execute the
initiator add command as follows:
a.
b.
c.
3.
Go to the MS Initiator and follow these steps:
a.
b.
c.
d.
4.
Click Targets.
5.
Select the target you want to log in to.
6.
Click Advanced.
7.
Select Chap Login Information.
8.
In Target Secret, type the secret (secret_initiator) that you created in
Step
9.
Select Mutual Authentication.
10.
Click OK.
11.
Click OK.
The initiator completes the normal login.
3-4
Enable CHAP on the presented target to which the initiator will login.
Create a secret (for example, secret_target).
Use Set CHAP.
Enable the CHAP for this initiator.
Create a secret (for example, secret_initiator).
To update the CHAP settings of the initiator, execute the set chap
command.
Click General.
Click Secret (in the middle of the window).
If this is the first time you are setting secrets, reset all the secrets.
Type the secret (secret_target) that you created in
2.
Step
1.
ISR654601-00 D