Command Line Interface; User Accounts; User Sessions; Admin Session - Qlogic iSR6200 Software Manual

6

Command Line Interface

This chapter provides information on using the command line interface (CLI) for
data migration services. It defines the guest iSR6200 account and the user
session types, admin and miguser. For each command, it provides a description,
the required session type, and an example.
To view information about all CLI commands, see the iSR6200 Command Line
Interface (CLI) User's Guide.

User Accounts

User accounts include the guest account. The guest account is the default user
account used to log into the iSR6200 Telnet session. The guest session has a
view-only type of access. The default password for this account is password.

User Sessions

User sessions include the admin session and miguser session, as described in
the following.

Admin Session

The admin is the system administrator session that provides access to CLI
commands that manage the system resources. The default password for starting
the admin session is config. You can start and stop an admin session using the
following commands:
admin [start/begin]
admin [end/cancel/stop]
iSR6200 <1> #> admin start
Password : *********
iSR6200 <1> (admin) #>
iSR6200 <1> (admin) #> admin cancel
iSR6200 <1> #>
ISR654608-00 B 6-1