Call For Service - Oki OKIPAGE8c Manuallines

CANNOT USE A6
PAPER ON TRAY 2
The second paper tray cannot feed A6 size paper. Use
Tray 1 or the manual feed slot.
ERROR
D6 [#########]
Yellow image drum is not installed properly. Open the
top cover, check, and reinstall as necessary. For instruc-
tions, see "Replacing the Image Drum."
ERROR
D7 [#########]
Magenta image drum is not installed properly. Open the
top cover, check, and reinstall as necessary. For instruc-
tions, see "Replacing the Image Drum."
ERROR
D8 [#########]
Yellow image drum is not installed properly. Open the
top cover, check, and reinstall as necessary. For instruc-
tions, see "Replacing the Image Drum."
ERROR
D9 [#########]
Black image drum is not installed properly. Open the top
cover, check, and reinstall as necessary. For instructions,
see "Replacing the Image Drum."
ERROR
DF [#########]
The transfer belt unit is not installed correctly. Open the
top and left-hand side covers, check and reinstall as
necessary. For instructions, see "Printer Maintenance " or
the online User's Guide.
ERROR
E0 [#########]
The fuser unit is not installed correctly. Open the top and
left-hand side covers, check and reinstall as necessary.
For instructions, see "Printer Maintenance " or the online
User's Guide.

Call for Service

If you see any of these messages, turn the printer off,
then turn it on again. If this does not clear it, make a note
of the error message, and contact your authorized
Okidata service dealer. For information on obtaining
service, see "Obtaining Service."
EEPROM RESETTING
or
ERROR
[nn] [#########]
where nn is not listed above
or
ERROR CONTROLLER
[nn-########]
32