Color Registration; Setting The Color Registration For Windows 95/98/Nt 4.0 - Oki OKIPAGE8c Manuallines

Setting the Color Registration for
Windows 95/98/NT 4.0
Since each color is printed separately, you must set the
color registration to ensure that the colors line up
properly:
Out of Registration
To ensure optimum print quality, you should set the color
registration on a routine basis (once a month or so).
It is also recommended that you set the color registration
when you change toner or image drums, when you load
paper in the paper tray, or if you move the printer.
1. Open the Color Registration Utility: click Start
Programs
Registration Utility.
2. Make sure Okipage 8c on LPT1: (or Okipage 8c PS
on LPT1:) is highlighted in the box (if you are using a
port other than LPT1:, make sure that port is
highlighted).
3. Click Print Color Calibration page.
The printer prints a color test page with 9 sections,
each with a series of lined boxes in it:
Lined Boxes
Section #1
List Box
18
Color
Registration
Proper Registration
Okipage 8c Okipage 8c Color
Lined Box Numbers