Using The Front Feeder With Multiple Sheets; Paper Tray Gauge - Oki OKIPAGE8c Manuallines

Using the Front Feeder
with Multiple Sheets
If you are going to use the front feeder to feed a stack
of print media, you need to go into the menu and set
the printer paper input default to the Front Feeder:
1. Press the ON LINE button (printer goes off line).
2. Press and release TRAY TYPE.
3. Press Enter.
4. Press /Reset until FRONT TRAY appears on the
display.
5. Press Enter to select FRONT TRAY.
An asterisk appears to indicate the new default
setting.
6. Press ON LINE to engage the setting and exit the
menu.

Paper Tray Gauge

The red paper tray gauge on the front of the printer
indicates how much paper is left in the tray. This
eliminates the need to open the drawer to check to
see how much paper is left.
Gauge
8
When printing using the Front Feeder,
be sure to set your software for front
feed:
1. Enter the printer setup menu
2. Select front feeder.
3. Select the media type, size and
orientation.