Oki OKIPAGE6w Specifications page 13

Safety Instructions (continued)
• The printer must be installed near a power outlet
which remains easily accessible.
• To avoid damaging the power cord, don't put anything
on it or place it where it will be walked on. If the cord
becomes damaged or frayed, replace it immediately.
• If you are using an extension cord or power strip with
the printer, make sure that the total of the amperes
required by all the equipment on the extension is less
than the extension's rating. The total ratings of all
equipment plugged into the outlet should not exceed
15 amperes.
• Do not poke anything into the ventilation slots on the
printer; you could get a shock or cause a fire.
• Aside from the routine maintenance described in the
online manual, don't try to service the printer
yourself; opening the cover may expose you to shocks
or other hazards.
• Do not make any adjustments other than those
outlined in the online manual: you may cause damage
requiring extensive repair work. See the online
manual for information on how to get your printer
serviced by qualified OKIDATA technicians, or call
1-800-OKIDATA (1-800-654-3282) for the location
of your nearest service center.
If anything happens that indicates that your printer is not
working properly or has been damaged, unplug it
immediately and follow the procedures in the online
manual for having your printer serviced.
These are some of the things to look for:
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the printer, or it has been
exposed to water.
• The printer has been dropped, or the cabinet is
damaged.
E-13