Uninterrupted Power Source (Ups Setting) - Thecus N2200XXX User Manual

After input the ACL backup file and click "Next" button, system will come out the
screen to list matched folders in between backup file and this RAID volume. Just
select the desired folders for ACL restore.
NOTE

Uninterrupted Power Source (UPS Setting)

The Thecus IP storage can also support various uninterruptible power supply unit
via either "Serial" or "USB" interface (depend on model) to provide extra data
security and accessibility in the case of a power failure. Additionally, the network
UPS is also supported.
From the Status menu, choose the UPS item and the UPS Setting screen appears.
Make any changes you wish, and press Apply to confirm changes.
• The ACL backup will only backing the share folder level, no apply to
its sub-layer.
• The ACL backup/restore can be used among ext3/ext4/XFS file
system but ZFS can only be used with other RAID volume with ZFS
file system created while backup/restore.
• If recursive has been checked during ACL restoration, it will apply all of
its sub-folder with same permission.
177