Thecus N2200XXX User Manual page 40

3. Press the power button on the front panel to boot up the
1U4200XXX/1U4600.
To connect N7700 series NAS to your network, follow the steps below:
1. Connect an Ethernet cable from your network
to the WAN/LAN1 port on the back panel of
the N7700.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protected socket. Press the
power supply switch to turn on the power supply.
3. Press the power button on the Front Panel to boot up the N7700.
40