Acl Backup And Restore - Thecus N2200XXX User Manual

Step 3
– Manually edit or run your backup tasks
After selecting "apply", you will be brought back to the Rsync Schedule Backup task
list.
Simply click the arrow on the Action section to start the task and click the box to
cancel the ongoing task. If any setting needs to be changed for task, tick the check
box in front of associated task then press "Edit" button to bring up the screen.
The "S" sign in each task is denoted "Synchronize" and "I" is denoted
NOTE
"Incremental" for backup mode of associate task.

ACL Backup and Restore

The ACL backup and restore feature are allowed system ACL (Access Control List)
been backup on RAID volume based to other location and restore it while needed.
Let's take example to see how it works.
There is system with RAID volume "RAID", select "Backup" to backup this RAID
volume's ACL to other location. The current RAID volume "RAID" has share folder as
listed on right hand screen shot.
For the ACL restore,
it could be restored in same system or used in other unit. For example, restore the
ACL backup file to other unit. This unit has RAID volume "RAIDpm" with share folder
as listed on right hand screen shot.
176