System Management; Date And Time: System Date And Settings - Thecus N2200XXX User Manual

System Management

The System Management menu gives you a wealth of settings that you can use to
configure your Thecus IP storage system administration functions. You can set up
system time, system notifications, and even upgrade firmware from this menu.

Date and Time: System Date and settings

From the Date and time menu, choose the item and the screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on Thecus IP storage with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Time
Item
Date
Time
Time Zone
NTP Server
Sync with external NTP
Server
WARNING
Description
Sets the system date.
Sets the system time.
Sets the system time zone.
Select Enable to synchronize with the NTP server.
Select Disable to close the NTP server synchronization.
Select YES to allow Thecus IP storage to synchronize with an NTP
server of your choice. Press Apply to change.
If an NTP server is selected, please make sure your Thecus IP storage has been
setup to access the NTP server.
60