Options - Uniden BC355N Owner's Manual

1. From Step 4 previously, select C ‐ C.bAnd. The first band
selection displays (B1 LO is automatically set to ON):
b1 lo
2. Scroll up or down to select bands for Close Call to monitor.
Press PROG. The screen displays that selection and "On. "
b1 lo on
Setting C ‐ C.ALEt Options
This menu controls whether the scanner will sound an alert tone
when a Close Call signal is detected. The options are:
• ALt.bEEP - Scanner beeps when a CC signal is found.
• ALt.OFF - Scanner does not been when a CC signal is found
Setting C ‐ C.PS Options
This menu controls whether the scanner will screen common
pager frequencies. The options are:
48
▲▼
▲▼