Additional Menu Options For Searching - Uniden UBC785XLT Owner's Manual

UB343ZH_UBC785XLT_OM_0622
C 001
512.0000 FM
CTCSS 250.3
Bank 1
Tone SQ ON,
CTCSS 250.3 Hz setting
C 003
512.0000 FM
CTCSS 250.3
UNIDEN Group A
Tone Search,
CTCSS 250.3 Hz detect-
ing

Additional Menu Options for Searching

Each of these additional menu options applys to all search ranges entered. If there is a
range that you do not want an option to apply, then simply enter the range number on the
numerical keypad. You will see the range number that you have selected disappears from
the display. (For more information on these options refer to the "Menu Descriptions" section
and "Additional Features" section.)
Options:
RECORD (for more information see page 17).
1. Press MENU.
2. Select 1:SERVICE OPTION / :CHAIN SEARCH / 6:RECORD by rotating the
VFO and pressing E.
3. Select 1:ON by rotating the VFO and pressing E.
ATTENUATOR (for more information see page 29).
1. Press MENU.
2. Select 1:SERVICE OPTION / :CHAIN SEARCH / 4:ATTENUATOR by rotating
the VFO and pressing E.
3. Select 1:ON by rotating the VFO and pressing E.
Remember! You can also use L or M instead of rotating the VFO.
Also instead of pressing E, you can press the VFO control.
DELAY
Refer to page 29.
6/22/06 3:01 PM
C 001
512.0000 FM
DCS 025
Bank 1
Tone SQ ON,
DCS 025 setting
C 003
512.0000 FM
DCS 025
UNIDEN Group A
Tone Search,
DCS 023 detecting
38
Page 38
512.0000 FM
Bank 1
Tone SQ ON,
CTCSS & DCS
non-setting
512.0000 FM
UNIDEN Group A
Tone Search,
no signal received
C 001
C 003