Program Lock Feature; Clear All Memory - Uniden BC355N Owner's Manual

PROgRAM lOCK FEATURE

The BC355N has a Program Lock feature to prevent accidentally
programming entries or unauthorized programming. Press and
hold the PROg key for longer than 2.5 seconds to toggle Program
Lock on and off. Program Lock is available in the following modes:
• Scan/Scan Hold
• Band Search/Band Search Hold
• Programming
• Close Call
When Program Lock is turned on, the scanner displays "on Prg‐
Loc" and then returns to scanning mode. Press and hold the PROg
key again to unlock this function and return to the previous mode.
Attempts to program on a bank with Program Lock activated will
display "Prg‐Loc" as a reminder. When Program Lock is turned off
(press and hold PROg for longer than 2.5 seconds), the scanner
displays "OF Prg‐Loc" and returns to the previous mode.

ClEAR All MEMORY

Turn on the scanner while pressing and holding PROg and l/O to
clear all memory in your BC355N. The band plan resets to USA.
57