Onboard Power Led (Jled1); Power Supply I C (Jpi C) - Supermicro Supero X9SCA User Manual

X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F

Onboard Power LED (JLED1)

An onboard Power LED header is
located at JLED1. This Power LED
header is connected to Front Control
Panel located at JF1 to indicate the
status of system power. See the table
on the right for pin definitions.
Power Supply I C (JPI
2
Power Supply I C Connector, located
2
at JPI C, monitors the status of the
2
power supply, fan and system tem-
perature. See the table on the right
for pin definitions.
C)
2
A
2-28
Onboard PWR LED
Pin Definitions
Pin# Definition
1 VCC
2 No Connection
3 Connection to PWR
LED in JF1
PWR Supply I C
2
Pin Definitions
Pin# Definition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 3.3V
A. PWR LED
B. PWR SMB
B