Onboard Power Led; Ipmi Heartbeat Led; Power Standby Led - Supermicro Supero X9SCL-F User Manual

Onboard Power LED

An Onboard Power LED is located
at LE2 on the motherboard. A lit
LE2 indicates that the motherboard
is either booting, or it is up and run-
ning. See the layout below for the
LED location.

IPMI Heartbeat LED

An IPMI Heartbeat LED is located at
LE7. When LE7 blinks, the IPMI functions
properly. Refer to the table on the right
for details. Also see the layout below for
the LED location.

Power Standby LED

The Power Standby LED is located at
LE4. When the power supply is plugged
into an AC outlet, and the power sup-
ply hard switch is switched on, LE4 will
turn on indicating Power Standby mode.
Please make sure LE4 is off before per-
forming service on the motherboard.
KB/MOUSE
JPW2
JPW1
JPUSB1
DIMM2B
DIMM1B
PHY
DIMM2A
JTPM
DIMM1A
S I/O
Fan4
82574L
PHY
82579
PHY
JPL1
JPL2
JPB
Slot7 PCI-E 2.0 x8
Slot6 PCI-E 2.0 x8
BMC
CTRL
(For X9SCM only)
Slot5 PCI-E 2.0 x4 on x8
B
JI2C1
JI2C2
LE7
Slot4 PCI-E 2.0 x4 on x8
Memory Chip
JWOL
COM2
JPG1
JPI2C
DDR3 1066/1333 UDIMM required
Socket H2
LGA 1155
CPU
CPU
X9SCM/X9SCL(-F)
Rev.1.0
Cougar Point
Standard PCH
Battery
B1 (*I-SATA 0/1:
X9SCL: SATA2, X9SCM: SATA3)
JBT1
USB 12/13 USB4/5 USB2/3
USB11
Onboard PWR LED Indicator
Status
Off
On
IPMI Heartbeat LED Indicator (LE7)
Green: Blinking
Power Standby LED Indicator (LE4)
Green: Solid On
Green: Off
FP CTRL
FAN1
JWD
JSPK
SPKR1
FAN2
FAN3
J29
JL1
T-SGPIO2
T-SGPIO1
FANA
JWF1
LE4 LE2
C
A
2-37
Chapter 2: Installation
LED Status
Definition
System Off
System On (running)
LED Settings
IPMI is Active
LED Settings
Standby Power is On
Standby Power is Off
(either the power sup-
ply hard switch is off or
system is unplugged,
or BOTH.)
A. Onboard PWR LED
B. IPMI Heartbeat LED
C. Power Standby