1. Enable Rsync Target Server
2. Add a username and password (they can be different than your NAS's
username and password)
3. Select Apply
NOTE
Now Rsync is turned on your NAS, which means it can be used as a target for Rsync
backup, in other words, only the backup NAS needs to be activated in this way.
Rsync
Step 2 – Setting up your backup task and schedule on your source NAS
-Log in to your other NAS (your source NAS) through the UI in your web browser
-Go to Rsync under Backup in the menu of the UI
-From the Rsync Schedule Backup task list, choose Add
The rsync backup setting screen appear as below:
• You will need this user name and password while the data is going to
remotely backup to this rsync target server.
• The Rsync target server is only allowed 3 rsync host to connect and
backup from.
130