Table of Contents
Advertisement
Using LDAP Search
You can search for a destination that is on the LDAP server.
For details on the LDAP server settings, refer to the Advanced User's
Guide on www.my.okidata.com.
1
Press the down arrow key repetitively to scroll to [LDAP], then
press <OK>.
2
Press the down arrow key repetitively to scroll to [Simple Search]
or [Advanced Search], then press <OK>.
• When you select [Simple Search], you can search only for
a user name.
• When you select [Advanced Search], you can search for a
user name or e-mail address. You can also select search
conditions to retrieve only results that contain all the
specified keywords.
3
Enter a keyword to search for a user name or e-mail address in
the LDAP server.
4
Select [Done], then press <OK> to start searching.
5
When the search results appear, press the down arrow key
repetitively to scroll to the destination you want, then press
<OK>.
The check box is selected. You can select multiple addresses.
6
When you have selected all the destinations, press the right
arrow key.
7
Make sure that [Finish Destination Selection] is selected, then
press <OK>.
8
Press the left arrow key repetitively to return to the internet fax
standby screen.
114
–
CX2731 MFP Basic User's Guide
Faxing
Advertisement
Table of Contents
