Brother MFC-9560CDW Basic User's Manual page 70

Chapter 9
c
Do one of the following:
 Press a or b to choose a setting you
need to change and press OK, and
then press a or b to choose an option
for the setting and press OK.
 If you do not need to change the
current default settings, go to
step d.
Print File Set
aPaper Size
Media Type
bMultiple Page
Select ab or OK
Note
• You can choose the following settings:
Paper Size
Media Type
Multiple Page
Orientation
Duplex
Collate
Tray Use
Print Quality
PDF Option
• Depending on the file type, some of
these settings may not appear.
d
Press Black Start or Color Start if you
have finished.
e
Press the dial pad key to enter the
number of copies you want.
Press OK.
Direct Print
FILE_1.PDF
No. of Copies:
Press Start
f
Press Black Start or Color Start to
print the data.
54
IMPORTANT
• To prevent damage to your machine, DO
NOT connect any device other than a
digital camera or USB Flash memory drive
to the USB direct interface.
• DO NOT remove the USB Flash memory
drive or digital camera from the USB direct
interface until the machine has finished
printing.
Note
You can change the default settings for
Direct Print by using the control panel
when the machine is not in the Direct Print
mode. Press Menu, 5 to enter the
USB Direct I/F menu. (See Menu
table on page 137.)