Brother MFC-9560CDW Basic User's Manual page 116

Error Message
Out of Memory
Print Unable XX
Protected Device
100
Cause
The machine's memory is full.
The machine has a mechanical
problem.
The protect switch of the USB
Flash memory drive is on.
Action
Fax sending or copy operation in
progress
Do one of the following:
 Press Black Start or Color Start to
send or copy the scanned pages.
 Press Stop/Exit and wait until the other
operations in progress finish, and then
try again.
 Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid
storing more faxes in the memory. (See
Printing a fax from the memory in
Chapter 4 of the Advanced User's Guide
and Fax Storage in Chapter 4 of the
Advanced User's Guide.)
 Add optional memory. (See Memory
board in Appendix B of the Advanced
User's Guide.)
Print operation in process
Do one of the following:
 Reduce the print resolution. (See
Advanced tab in the Software User's
Guide.)
 Clear the faxes from the memory. (See
the above explanation.)
Do one of the following:
 Turn the power switch off, wait a few
minutes, and then turn it on again. (See
Transferring your faxes or Fax Journal
report on page 104.)
 If the problem continues, call Brother
Customer Service.
Turn off the protect switch of the USB Flash
memory drive.