Brother MFC-J625DW Basic User's Manual page 82

Error Message
Out of Memory
Paper Jam [Front]
PaperJam Front,Rear Paper is jammed in the machine.
Paper Jam [Rear]
Screen init. Fail
74
Cause
The machine's memory is full.
The memory card or USB Flash
memory drive you are using does not
have enough free space to scan the
documents.
Paper is jammed in the machine.
Paper is jammed in the machine.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The Touchscreen was pressed before
the power on initialization was
completed.
Debris may be stuck between the
lower part of the touchscreen and its
frame.
Action
If a copy operation is in process
Press Stop/Exit and wait until the
other operations that are in progress
finish, and then try again.
Press Stop/Exit.
Delete unused files from your memory
card or USB Flash memory drive to
make some free space and then try
again.
Remove the jammed paper by
following the steps in Paper is jammed
at the front of the machine
uu page 78.
Make sure the paper length guide is
set to the correct paper size.
Remove the jammed paper by
following the steps in Paper is jammed
at the front and back of the machine
uu page 81.
Make sure the paper length guide is
set to the correct paper size.
Remove the jammed paper by
following the steps in Paper is jammed
at the back of the machine
uu page 80.
Make sure the paper length guide is
set to the correct paper size.
Clean the paper pick-up rollers.
(uuAdvanced User's Guide: Cleaning
the paper pick-up rollers)
Make sure that nothing is touching or
resting on the Touchscreen.
Insert a piece of stiff paper between
the lower part of the touchscreen and
its frame and slide it back and forth to
push out the debris.