Brother MFC-J625DW Basic User's Manual page 53

e
Press Setup Receive.
f
Press s or t to display
Remote Codes.
g
Press Remote Codes.
h
Press On.
i
Do one of the following:
If you want to change the Remote

Activation Code, enter the new code.
Press OK, go to step j.
 If you do not want to change the
Remote Activation Code, press OK,
go to step j.
j
Do one of the following:
 If you want to change the Remote
Deactivation Code, enter the new
code.
Press OK, go to step k.
 If you do not want to change the
Remote Deactivation Code, press
OK, go to step k.
k
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.
Telephone and external devices
6
45