Table of Contents
Advertisement
8
Chapter 3
Procedures
Step 1: Remove the Rx0LE Thin Client Left Side Cover
1. Perform a proper shutdown of the thin client by closing all files and ending your
2. Unplug the power cord and power adapter, remove all of the cables from the rear of the
3. Position the thin client horizontally, and then remove the screws from the left side cover
Figure 6 Removing the left side cover screws
4. Slide the left side cover toward the rear of the device and remove it to expose the main
Figure 7 Left side cover removed to expose the main board
Caution
Follow all precautions listed in the Quick-Start Guide that came with your thin
client for disconnecting and reconnecting the thin client.
session, and then press the power button to turn off the thin client.
thin client, and then detach the vertical foot.
of the thin client using a small Phillips screwdriver as shown in Figure 6.
board as shown in Figure 7. Notice that the rear of the thin client is positioned at the
bottom of the photo.
Hide quick links:
Advertisement
Table of Contents
