End User License Agreement (“License”) A copy of the Wyse Technology End User License Agreement is included in the software and provided for your reference only. The License at http://www.wyse.com/license as of the purchase date is the controlling licensing agreement.
• R90L7 Kit Contents The conversion kit includes: • 1 Year ThinOS Maintenance (you will receive an email from Wyse or your reseller with full instructions) • Conversion Software Assembly CD-ROM • Wyse Conversion Labels (you must attach a Wyse label to each converted thin client)
Wyse Self-Service Center (on the Wyse.com home page, go to Support > Knowledge Base > Home tab) or call Customer Support at 1-800-800-WYSE (toll free in U.S. and Canada). Hours of operation are from 6:00 A.M. to 5:00 P.M. Pacific Time, Monday through Friday.
Converting Wyse R Class to ThinOS ® This chapter includes the requirements and procedures you need to install and use Wyse USB Firmware Tool to update your thin client to ThinOS firmware. The purpose of the Wyse USB Firmware Tool is to configure a bootable USB key for device firmware.
3. Create a shortcut on the desktop for the Wyse USB Firmware Tool.exe file. Step 3: Use Wyse USB Firmware Tool to Configure a Single USB Key to Install Firmware 1. Double-click the shortcut to run the tool and open the Wyse USB Firmware Tool wizard (the welcome page provides the product version and description, and a link to view the Wyse end user license agreement).
Page 9
Converting Wyse R Class to ThinOS Figure 3 Wyse USB Firmware Tool wizard 2. Click Next to open the Select an Option dialog box. Figure 4 Configuration options 3. Select the Configure a single USB key to Copy or to Update firmware option, and then click Next to open the Select the Configuration dialog box.
Page 10
Chapter 2 Figure 6 Browse for image file 7. Click Browse. Figure 7 Browse to select commandsXml.xml 8. Navigate to the R Class ThinOS Conversion Image folder on your hard drive (this is the location you selected in "Step 1: Copy the R Class ThinOS Conversion Image Folder to Your Local Hard Drive"), click on the commandsXml.xml file to select it (you may need to select the All Files option from the Files of Type box to display the commandsXml.xml file for selection), and then click Open.
Page 11
3. Click OK to close the System Information dialog box. The thin client is ready for operation and setup by an administrator. For more information, see Administrators Guide: Wyse ThinOS™. Administrator and other documentation for your thin client model are...
Page 12
Step 6: Attach a Wyse Conversion Label on Each Converted Thin Client The conversion kit is supplied with Wyse Conversion Labels that must be attached to each thin client as shown in Figure 9. Be sure you have purchased the amount of labels you need.
Wyse USB Firmware Tool. If you experience problems booting from a configured USB key, it is recommended that you try a different brand of USB key. The following list of USB keys have been successfully tested with the Wyse USB Firmware Tool: •...
Page 14
Installation Guide ® Wyse R Class Conversion to ThinOS Issue: 032911 Written and published by: Wyse Technology Inc., March 2011 ® ® Created using FrameMaker and Acrobat...