The Tablet Pc Stops Working; The Radio Connection To A Network Does Not Work; The Battery Discharges Too Quickly - Fujitsu STYLISTIC M532 Operating Manual

Troubleshooting and tips

The Tablet PC stops working

Energysaving mode TheTabletPC
Cause
The Tablet PC is in energy saving mode.
An application programme has caused the
malfunction.
The battery is dead.
The Tablet PC does not respond to inputs.

The radio connection to a network does not work

Theradioconnectiontoanetwork does notwork
Cause
The wireless component is disabled.
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

The battery discharges too quickly

Battery:
Cause
You may have an application running that
consumes a great deal of power due to frequent
accessing of radio, GPS or network connections.
The maximum brightness may have been set
for the screen.
64
Troubleshooting
► Leave the energy saving mode: Press the
ON/OFF switch.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
► Charge the battery.
or
► Connect the mains adapter to the Tablet
PC.
► Restart the Tablet PC manually (see
the Reset button", Page
Troubleshooting
► Switch the radio component on (see
"Switching the wireless components on and
off", Page 26).
► Check that the wireless connection is
correctly set up via the Settings.
Troubleshooting
► Use the mains adapter as frequently as
possible.
► Close unnecessary applications, reduce
the frequency of the access to radio
components or the network or switch off the
radio components in a targeted way via the
settings.
► Reduce the brightness of the screen to
lower energy consumption: you will find
the adjustment under Settings > Display >
Brightness.
62)
Fujitsu Technology Solutions
"Using