Front Panel - Focusrite Saffire PRO 40 User Manual

Front Panel

The Front Panel includes the input connectors for Channels 1 and 2, as well as all the input gain controls and monitoring controls.
1 3 6 7 10 12
2 8 9 13
4 4 11
5 5
14
1. Channel 1 and 2 Combo XLR input sockets. Each socket will accept an XLR, or 1/4 inch TRS (balanced) or TS (unbalanced)
Jack connector.
2. Two Phantom power switches with LED's for Mic inputs 1-4 and 5-8.
3. Channel 1 and 2 Gain control knobs – use these to set the level of your input signal
4. Instrument switch with LED.
5. Pad switch with LED. Maximum Signal input level without pads is +7dBu, with pads is +16dBu
6. Channels 3 to 8 Preamp Gain control knobs. – use these to set the level of your input signal
7. Signal level meters for analogue inputs 1-8: -42, -18, -6, -3, 0dBFS LEDs
8. Firewire active LED - Lit when the Saffire PRO 40 is successfully connected to the computer.
9. Synchronisation Lock LED – Lit when Saffire PRO 40 is either syncronised to its internal clock, or to an external digital input.
10. Monitor Level control pot. – Can be configured to control any number of the analogue outputs.
11. Monitor Dim and Mute switches with associated LEDs.
12. Headphones 1 & 2 level control and output 1/4 inch jacks.
13. Power switch and LED indicator. Lit when the unit is receiving power and is turned on
14. Removable rack ear covers – remove when fitting to a 19 inch rack.
6