Focusrite Saffire PRO 40 User Manual page 14

Track Name
As a default, each track is given a number as a name. Double click to rename the track to something more useful such as 'Vocal Mic'.
Output Channel
The output channel of the mixer is where all the input channels are routed to and mixed together. The output
channel gives you control of the overall level of the entire mix.
You can send a mix to any or all hardware outputs; if a single output is selected this is displayed at the top of the
output channel. "Many..." will be displayed if multiple outputs are selected.
The output channel can be either mono or stereo depending on the status of the stereo button. When the channel
is set to stereo, you will see that the tab for that mix doubles in size. This is due to the fact that the stereo version
takes up 2 channels of the available total output channel count.
Note that when pressing on the solo button on an output channel, that channel (i.e. the whole mix) is soloed and
routed to Monitor outputs 1 and 2. This is a non-latching button.
Click on "Sel..." to chose the output destination of that mix.
You can name the current mix by typing the desired name in the text field below the output channel. You will see
the name appear in the mix tab. For example, Mix 1 can be renamed "Monitor Mix", and Mix 5 named "Headphone
1 Mix".
To copy an existing mix to another mix, simply click on "Copy Mix To..." and select the mix to which you would like
to copy.
Note that you can only copy a stereo mix to another stereo mix, and a mono mix to another mono mix. Therefore
you must make sure that you have correctly set up the output channels to either stereo or mono before copying
the mix.
14