File Menu - Focusrite Saffire PRO 40 User Manual

ASIO Buffer Size
Set the buffer size of your ASIO driver here.
A small buffer size will in result in lower latency at the expense of increased CPU usage.
A high buffer size will result in a higher latency but with lower CPU usage.
If you are using lots of virtual instruments and effects processing in your DAW project, and the CPU usage is high, then increase
the buffer size to permit lower CPU usage.

File Menu

Mac Windows
Open - opens a File open dialog allowing selection of any pre-saved Saffire PRO 40 Control set-ups.
Save - opens a File save dialog allowing selection of a location into which your Saffire PRO 40 Control set-up can be saved.
Subsequent saves overwrite the original file.
Save As - opens a File save dialog allowing selection of a location into which your Saffire PRO 40 Control set-up can be saved. Use
this option if you want to keep your original saved set-up and create a new one with a different name.
Restore Factory Default - Causes the Saffire PRO 40 to revert to the original default state in which it left the factory. This can be
used to globally reset all mixer, routing, and monitor settings, allowing creation of a new set-up from scratch.
Save to Hardware - This saves the current Saffire PRO 40 Control set-up to the Saffire PRO 40 hardware. If you are moving the
Saffire PRO 40 from one computer to another and want to retain the set-up, then choose this option. Note that Saffire PRO 40
Control does not automatically load from hardware (as this would overwrite a current set-up); it must be loaded manually.
Load from Hardware - This loads the saved set-up from the Saffire PRO 40 hardware into the Saffire PRO 40 Control software.
As you can see from the above screen shots, 'Open', 'Save' and 'Save as' all have keyboard shortcuts. These are standard shortcuts
for their respective functions, so if you are regularly changing settings for your various sessions, then the shortcuts will reduce
your set-up time.
23