ID (Identification)
Clicking on the ID icon
"Network" and "Signal" LEDs through green–orange–red states for 10 seconds.
Tools Menu
Clicking on the Tools icon
Line Level Setup – Sets the analogue line output level at 0 dBFS:
• +18 dBu
• +24 dBu (factory default setting)
Mute (Line Out) – On/Off state.
Mute on Power-up – On/Off state (factory default is On).
Attenuation (Headphone) – The headphone output volume can be attenuated for safety. Available
settings are:
• 0 dB
• 6 dB
• 12 dB (factory default setting)
Preferred Master – On/Off state.
will identify the physical device being controlled by cycling its front panel
will gain access to the following system settings:
11