Download Print this page

Pioneer SPH-DA100 Operation Manual page 36

Car receiver with appradio
Hide thumbs Also See for SPH-DA100:

Advertisement

Chapter
Customizing preferences
09
Equalizer curve
S.Bass
(Super Bass) is a curve in which only low-
pitched sound is boosted.
Powerful
is a curve in which low-pitched and high-
pitched sounds are boosted.
Natural
is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal
is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat
is a flat curve in which nothing is boosted.
Custom1
is an adjusted equalizer curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2
is an adjusted equalizer curve that you cre-
ate. If you select this curve, the effect is applied to all
audio sources.
Flat
When "
" is selected, no supplement or
correction is made to the sound. This is use-
ful to check the effect of the equalizer
curves by switching alternatively between
Flat
"
" and a set equalizer curve.
1 Display the "Audio" screen.
For details, refer to Customizing the audio
settings on the previous page.
2 Tap [Graphic EQ].
3 Tap the equalizer curve you want.
36
En
Adjusting the 5-band graphic equalizer
You can adjust the level of each band for the
equalizer curves.
Custom1
A separate "
ed for each source. If you make adjustments
when a curve other than "
lected, the equalizer curve settings will be
Custom1
recorded in "
Custom2
A "
" curve that is common for all
sources can be created. If you make adjust-
Custom2
ments when the "
Custom2
lected, the "
ed.
1 Display the "Audio" screen.
For details, refer to Customizing the audio
settings on the previous page.
2 Tap [Graphic EQ].
3 Tap one of the keys to select a curve
that you want to use as the basis of cus-
tomizing.
4 Tap the frequency that you want to ad-
just the level for.
You can select the following frequencies:
100Hz
315Hz
1.25kHz
5 Tap the screen to adjust the level of the
equalizer band.
You can adjust the equalizer band level be-
+12dB
tween "
" and "
" curve can be creat-
Custom2
" is se-
".
" curve is se-
" curve will be updat-
3.15kHz
8kHz
–12dB
".

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Appradio sph-da100