Setting The Bluetooth Auto Connect Function; Disconnecting A Bluetooth Device - Pioneer SPH-DA100 Operation Manual

Chapter Chapter
Registering and connecting a Bluetooth device Using hands-free phoning
07 07
5 Tap the Bluetooth device name you
want to connect.
When a connection is successfully established,
the checkbox next to the device name is
selected.
The available profile icons are displayed as fol-
lows:
•
: Appears when the HFP (Hands-Free
Profile) is available.
•
: Appears when the SPP (Serial Port
Profile) is available.
If a device is already connected with the
same profile, that device is disconnected
and the new device will be connected.
Setting the Bluetooth auto
connect function
If this function is set on, a connection be-
tween your Bluetooth device and this product
will take place automatically as soon as the
two devices are less than a few meters apart.
Initially, this function is set to "
1 Tap [Phone] on the Home screen.
For details, refer to Home screen on page 10.
The phone menu screen appears.
2 Tap on the phone menu.
26 26
En
The "
appears.
3 Tap [Auto Connect] to turn automatic
connection off.
If you Bluetooth device is ready for a Bluetooth
wireless connection, a connection to this prod-
uct will automatically be established.
Disconnecting a Bluetooth
device
1 Tap [Phone] on the Home screen.
The phone menu screen appears.
2 Tap
On
".
The "
appears.
Bluetooth Connection Menu
To turn automatic connection on, tap [
Connect
] again.
For details, refer to Home screen on page 10.
on the phone menu.
Bluetooth Connection Menu
" screen
Auto
" screen