Using The External Navigation Unit - Kenwood DDX719 Instruction Manual

Using the external navigation unit

(Only for DDX7049BT/DDX4049BT/DDX3049)
You can connect a navigation unit (KNA-G610 /KNA-G630 : optional accessory) to the navigation
input terminal so that you can view the navigation screen. (☞ page 80 )
The navigation guidance comes out through the front speakers even when you listen to an
audio source.
To view the navigation
screen
On <Top Menu>:
or
On any screen:
The navigation screen is activated.
• While the navigation screen is displayed,
the touch panel operations are available
only for using navigation function.
• The aspect ratio of the navigation screen
is fixed to <FULL> regardless of the
<Aspect> setting (☞ page 46).
To cancel the navigation screen
DDX7049BT DDX4049BT/
DDX3049
Settings for navigation unit
1
On <Top Menu>:
40
DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049
2
3
Guidance Select front speakers
used for the navigation
guidance.
Volume Adjust the volume of the
navigation guidance. (0
to 35)
NAV Mute Select <ON> to
attenuate the sound
coming through
speakers other than the
front speakers during
navigation guidance.
NAV Setup Press [Enter] to display
the setup screen for
the navigation unit.
See the instruction
manual supplied for the
navigation unit.