Step 6-Configuring Raid Devices; Japanese 日本語 - HP Xw4550 - Workstation - 2 GB RAM Installation Manual

Lsi sas 3041e serial attached scsi raid host bus adapter

Hide thumbs Also See for Xw4550 - Workstation - 2 GB RAM:

Table of Contents

Figure 9

Attaching the HDD LED cable

Step 4—Reassembling the workstation

Reinstall the card support, if applicable.

Reinstall the side access panel.

Reconnect power to the workstation and all external devices.

Restore power to the workstation and all external devices.

Step 5—Loading and setting up driver software

For instructions on loading and setting up the drivers for use with your workstation, see the

manufacturer's documentation shipped with the RAID controller card.

At the time of component installation, look for device firmware and driver updates, designated for your

workstation model and operating system. Obtain updates from

workstationsupport.

Step 6—Configuring RAID devices

For detailed instruction on configuring RAID devices, see the service guide for your HP workstation

model at http://www.hp.com/support/workstation_manuals.

Additional information is available at

Japanese 日本語

This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then

select your workstation product and select Japanese from the drop down Manual Language menu.

このドキュメントは日本語版が用意されています。http://www.hp.com/support/workstation_manuals

にアクセスし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウンメニ

ューから Japanese を選択してください。

LSI SAS 3041E Serial Attached SCSI RAID Host Bus Adapter installation

http://www.hp.com/support/RAID_FAQs

http://www.hp.com/go/

ENWW

Table of Contents