Table of Contents
Advertisement
•
Remove an adapter from the Boot Order list by moving the cursor to the Boot Order field of the
adapter, and then pressing the Del key.
You are prompted to save the changes before exiting the screen.
The Adapter List screen is the gateway to the rest of the utility through the Adapter Properties screen (on
page 11). To access the Adapter Properties screen, select a listed adapter, and then press the Enter key.
Adapter Properties screen
The Adapter Properties screen provides information about the adapter, and gives access to other screens
that enable you to configure or manage a RAID volume or to view information about devices connected to
the adapter.
•
To configure or manage a RAID volume, move the cursor to the RAID Properties field, and then press
the Enter key.
•
To view information about devices connected to the adapter, move the cursor to the SAS Topology
field, and then press the Enter key.
RAID Properties screen
One of the following screens is displayed when the RAID Properties link on the Adapter Properties screen
is selected:
•
If no RAID volumes are currently configured, the Select New Array Type screen is displayed.
•
If at least one RAID volume is currently configured, the View Array screen is displayed.
SAS BIOS configuration utility 11
Advertisement
Table of Contents
