Running Image Library From The Cd-Rom; Running E-Diag Tools From The Cd-Rom - HP VL400 - Vectra - 64 MB RAM User Manual

NOTE

Running Image Library from the CD-ROM

To run Image Library from the HP Image Library & Diagnostics System
CD, insert the CD-ROM in your optical drive while your Windows
operating system is running. The user interface will start automatically
(if not, check that the 'AutoPlay' CD function is enabled).
Alternatively, you may run the Image Library manually by clicking on
Start and selecting the option Run. Then Enter the command:
D:\FrontPanel
where 'D:' defines your optical drive location.
For details, see "Starting and Using the User Interface" on page 22 of
this Guide.
Running e-Diag Tools from
To run e-DiagTools from your HP Image Library & Diagnostics CD,
follow this procedure:
1 Insert the CD-ROM in your optical drive
2 Shut down the operating system and restart your computer
3 Ensure that the CD-ROM drive is configured in the BIOS to be the
first device to boot from. Set the BIOS attribute 'PNP OS' to the
option 'No'
4 The PC boots from the CD-ROM. The programs on the CD-ROM will
automatically determine the appropriate version of e-DiagTools to
run and the main Diagnostics menu of the CD-ROM appears.
Select the option to run the hardware diagnostics. This will open e-
DiagTools.
The main Diagnostics menu will only appear to the user when the CD-
ROM is used to boot the PC, as described above. The Diagnostics tools
are not accessible from Image Library menu options under Windows.
14
the CD-ROM