Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive connector cable, bracket, or
screws. The hard drive connector cable is included in the Cable Kit, spare part number 645968-001.
The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number
646969-001.
Description
For use with all computer models:
500-GB, 5400-rpm
250-GB, 5400-rpm
250-GB, 5400-rpm
For use only with computer models equipped with an Intel processor:
320-GB, 5400-rpm
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory module/wireless module compartment cover (see
on page
Remove the hard drive:
1.
Loosen the captive screw (1) that secures the hard drive compartment cover to the computer.
46
Chapter 4 Removal and replacement procedures
Battery on page
42).
41).
Spare part number
634932-001
645191-001
622641-001
622643-001
WLAN module