USB board
Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Memory module/wireless module compartment cover (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
Remove the USB board:
▲
Remove the USB board and cable.
Battery on page
41), and then remove the following components:
Hard drive on page
46)
Keyboard on page
51)
Top cover on page
54)
Speakers on page
61)
Spare part number
646128-001
WLAN module on page
Component replacement procedures
42)
63