Installing A Memory Module - HP TouchSmart IQ520 - Desktop PC Manual

Installing a memory module

Upgrade the memory in your HP TouchSmart PC with memory of the same type and speed as the memory
originally installed. The capacity for both memory modules must match for optimal performance. Both
memory modules can be installed by using the same procedure listed below.
CAUTION: When handling a memory module, be careful not to touch any of the contacts.
Doing so may damage the module.
1 Remove the memory module. See "Removing a memory module" on page 8.
2 Align the memory module with the socket, so that the key slot on the connector edge is same as the
module that you removed.
NOTE: The sockets are keyed. If the module slot does not match the socket, turn the memory
module over.
10
Upgrading and Servicing Guide